Xerox D110 User Manual - page 199
Causes and Actions
Yes/No
Symptoms
Copy density is set to Dark, or to Light.
Cause
Yes
The copy is too dark or
too light
If No, go to next
symptom.
Adjust the copy density.
Action
If problem is not solved, go to next Cause/Action.
Density of the document is too light.
Cause
Adjust the copy density.
Action
If problem is not solved, go to next Cause/Action.
The Original Type is inappropriate.
Cause
Copy black text. If it is too light, select Text for
Original Type.
Action
Causes and Actions
Yes/No
Symptoms
Paper set in the paper tray is misaligned.
Cause
Yes
The copy shifts slightly
If No, go to next
symptom.
Align the edges of the paper, and load it flush against
the front tray corners.
Refer to .
Action
The paper is damp.
Cause
Yes
Part of the image is
missing on the copy
If No, go to next
symptom.
Replace with paper from a new ream.
Refer to .
Action
If problem is not solved, go to next Cause/Action.
Paper with folds or wrinkles has been set in the paper
tray.
Cause
Replace with paper from a new ream.
Refer to .
Action
If problem is not solved, go to next Cause/Action.
The document is pasted together or folded in.
Cause
The folded in or pasted part of the document may
not be touching the document glass. Place a stack of
white sheets on the document to hold the document
down flat against the document glass.
Action
The document enlargement ratio is too large.
Cause
Yes
Stripes appear in the
copy
If No, go to next
symptom.
Stripes can appear at some enlargement ratios. Adjust
the copy enlargement ratio.
Refer to .
Action
15-43
Xerox
®
D95/D110/D125 Copier/Printer
User Guide
Problem solving
(continued)