Xerox D110 User Manual - page 336
Recommended solution
Possible cause
Fault
code
Jam or communication error with
the SquareFold Trimmer Module
013-221
013-222
013-223
013-224
013-225
013-226
013-227
013-228
013-229
013-230
013-231
013-232
013-233
013-234
013-235
013-236
013-237
013-238
013-239
013-240
013-241
013-242
013-243
013-246
1.
Power off/on the machine.
2.
If fault persists, call for service.
A top cover is open.
013-303
013-304
1.
Open the Top Left and Right Covers of the
SquareFold Trimmer Module.
2.
Close the SquareFold Trimmer Module Top
Left and Right Covers.
3.
If fault persists, power off/on the machine.
4.
If fault persists, call for service.
The Trimmer Waste Container is full
or has a fault.
013-208
013-940
013-941
1.
Pull open the container and empty any
trimmer scraps from it.
2.
Reinsert the container into the SquareFold
Trimmer Module.
3.
Ensure that the container is fully pushed
in, and that the indicator light is not lit.
4.
If fault persists, repeat Steps 1-3.
5.
If fault persists, power off/on the machine.
6.
If fault persists, call for service.
Xerox
®
D95/D110/D125 Copier/Printer
22-18
User Guide
SquareFold Trimmer Module
(continued)