Xerox D110 User Manual - page 218
Remove any paper currently loaded in the tray.
a)
b) Loosen the two screws to remove the guides.
c) Adjust the guides to fit the new paper size and retighten the two screws.
4. Open the ream of paper with the seam side facing up.
5. Fan the sheets before loading them into the tray.
6. Load and align the edge of the paper against the RIGHT edge of the tray.
7. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the UI.
8. If changes have been made to the paper tray, select the Change Settings button;
otherwise proceed to the next step.
a) Make the desired selections for the Paper Type/Paper Weight, Paper Size, and
Paper Color.
Xerox
®
D95/D110/D125 Copier/Printer
17-2
User Guide
High Capacity Feeder (HCF/Trays 6 and 7), 8.5 x 11 in./A4