Xerox D110 User Manual - page 260
Other manuals for D110:
System Administration Manual, User Manual, User Manual, Detailed Specifications, Specifications, Specification, Supplementary Manual, User Manual, Manual
of
392
Unloading the Stacker Tray
1. Press the Unload button on the HCS control panel.
Wait until the Unload indicator lights and then open the HCS front door.
2. Open the front door after the Unload indicator lights.
3. Position the securing bar on top of the stacked paper.
4. Pull the Stacker Cart straight out of the HCS.
5. Remove the securing bar.
6. Remove the paper from the Stacker Tray.
7. Push the empty Stacker Cart straight into the HCS.
8. Position the securing bar on the fixed area inside the HCS.
9. Close the front door; the tray will rise to the operate position.
Xerox
®
D95/D110/D125 Copier/Printer
20-4
User Guide
High Capacity Stacker (HCS)