Xerox D110 User Manual - page 312
Other manuals for D110:
System Administration Manual, User Manual, User Manual, Detailed Specifications, Specifications, Specification, Supplementary Manual, User Manual, Manual
of
392
7. Detach the outside staples along the line.
8. Push a new staple cartridge into the unit.
9. Reinstall the cartridge unit to its original position in the finisher.
10. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Fault codes
If an error caused the printing to end abnormally, or a malfunction occurred in the
Booklet Maker Finisher, then an error code is displayed.
If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact your Xerox Customer Support Center.
Xerox
®
D95/D110/D125 Copier/Printer
21-40
User Guide
Standard/Booklet Maker Finisher