Xerox DocuColor 3535 Quick Start Manual - page 8
8
Quick Start Guide
To perform Setup from the Copier Control Panel, select one menu after another and
enter information about your Fiery and your network and printing environment. In
each Setup screen, the last line of the display shows the name of the current Setup
menu.
To prepare for Fiery setup, print a Configuration Page, which shows the current printer
default settings. After you have finished running Setup, print the Configuration Page
again to confirm your new settings.
T
O
THE
C
ONFIGURATION
P
AGE
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
1.
On the Copier Control Panel, press the Message Status button.
2.
From the Touch Screen, press the Billing Meter/Print Report tab.
3.
Press the Print Report/List button.
4.
Press the Copy Mode Settings button.
5.
Press the Settings List/Common Items button.
6.
On the Copier Control Panel, press the Start button.
The Configuration Page and the System Settings List are printed.
T
O
THE
C
ONFIGURATION
P
AGE
FROM
C
OMMAND
W
ORK
S
TATION
1.
In Command WorkStation, choose Print Pages from the Server menu.
2.
Click Configuration.
3.
Click Print.
N
OTE
:
The other pages you can print from the Command WorkStation include the
Test Page, Font List, Job Log, and color charts.
For an introduction to Fiery Setup and detailed instructions on setting up the Fiery
from the Copier Control Panel and from a Windows computer using Command
WorkStation or WebSetup, see the
.