Xerox Fiery EX12 Color server Configuration Manual - page 61
4
4-7
Fiery Control Panel
Suspend Printing
Suspend communication between the Fiery and the copier. You
must
suspend
printing if you want to interrupt the current Fiery job and use the copier to make
copies or print another job first. Jobs continue to process on the Fiery. After you
make the copies, select Resume Printing to continue printing jobs from the Fiery.
Resume Printing
Resume communication between the copier and the Fiery after you have finished
making copies or printing other jobs.
Shut Down
Shut down all Fiery activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the Fiery. The following
options are available from the submenu that appears:
Restart Server
—Restarts the server without shutting down the Fiery hard disk.
Shut Down System
—Shuts down the Fiery hard disk.
Reboot System
—Restarts the system after shutting down the Fiery hard disk.
Clear Server
Clear all jobs in all server queues, as well as all jobs archived on the Fiery hard disk,
the index of archived jobs (in the Archive window), all FreeForm masters, and the
index of FreeForm masters (in the FreeForm window). Check with your
administrator or operator before choosing Clear Server. If an Administrator password
has been set, you must enter it to access Clear Server.
Run Setup
Enter the Setup menu and change Setup option settings.
Run Diagnostics
This function is provided for service representatives only. For information about
running diagnostics, contact your authorized service/support technician.
Tray Alignment
Use this option to adjust the placement of text and images on the page so that
they are correctly aligned on the sheet of paper and both sides of a duplex sheet
have the exact same alignment. For more information on this function, see the
EX12
EX2000d