Xerox Phaser 3425 Service Manual - Reinstallation Notes

8-24

Phaser 3425 Laser Printer Service Manual

3.

Remove 1 screw securing the Fan retainer (stopper) and remove the fan to the left 

while feeding the cable through the printer from the right side.

Reinstallation Notes

Note

If not already done during removal, loosen the screws securing the Laser 

Assembly sufficiently to route the fan cable under the laser.

Sub Fan Assembly (PL 9.3.35)

1.

Remove the Top Cover Assembly (page 8-9).

2.

Disconnect the Sub Fan connector CN 21 from the Main Board.

Note

If you wish, you can loosen the screws securing the Laser Assembly and tilt 

it to provide additional access to remove the cable. This will be necessary 

when routing the cable back under the Laser Assembly during reinstallation.

1.

Stopper

2.

Main Fan

-

1

2