Xerox Phaser 3425 Service Manual - Using The Parts List

Parts Lists

9-3

Using the Parts List

1. No.: 

The callout number from the exploded part diagram. 

2. Part Number:

 The material part number used to order specific parts.

3. Qty:

 This number represents the parts per printer, not the number of parts 

supplied in the actual part order. 

4. Name/Description: 

Details the name of the part to be ordered and the number 

of parts supplied per order.

5.

Parts identified throughout this manual are referenced PL #.#.#; For example, 

PL 3.1.10 means the part is item 10 of Parts List 3.1.

6.

A black triangle preceding a number followed by a parenthetical statement in an 

illustrated parts list means the item is a parent assembly, made up of the 

individual parts called out in parentheses.  

7.

The notation “with X~Y” following a part name indicates an assembly that is 

made up of components X through Y. For example, “1 (with 2~4)” means part 1 

consists of part 2, part 3, and part 4.

8.

An asterisk (*) following a part name indicates the page contains a note about 

this part.

9.

The notation (NS) next to a part indicates that pariticular part is not spared, but 

contained in a kit or major assembly.

10.

The notation “J1<>J2 and P2” is attached to a wire harness.  It indicates that 

connector Jack 1 is attached to one end of the wire harness and connector J2 is 

attached to the other end that is plugged into P2.

Note

Only parts showing part numbers are available for support.   Parts not showing 

part numbers are available on the parent assembly. 

Legend:

Identifier

Meaning

C

C-ring

E

E-ring

KL K-clip

S

Screw