Xerox Phaser 3425 Service Manual - page 76
4-8
Phaser 3425 Laser Printer Service Manual
Paper Mis-feed from Tray 3 (Optional Feeder)
Troubleshooting References
Procedure
Applicable Parts
Wiring and Plug/Jack Map References
Main Board
Tray 3 Assembly
Step
Action and Questions
Yes
No
1
a.
Is paper loaded correctly?
Go to Step 2.
Load paper
correctly.
2
a.
Is the tray damaged?
b.
Are parts missing?
Replace Tray 3
Assembly.
Go to Step 3.
3
a.
Is Tray 2 chute obstructed?
Clear
obstruction.
Go to Step 4.
4
a.
Is the interface connector between the
printer and Tray 3 damaged?
Replace
interface
harness.
Go to Step 5.
5
a.
Does Tray 3 Pick Roller rotate when the
Solenoid actuates? Refer to "Service
Diagnostics Menu Map" on page 3-9.
Go to Step 5.
Replace Tray 3
Assembly.
6
a.
Are the feed roller or retard/drag pads dirty ? Clean if dirty.
Replace Tray 3
Assembly
Replace Main
Board.