Xerox WORKCENTRE 7120 Reference Manual - page 12
dc10cc0466
Customer Support
Page 12
BITS PER PIXEL
PJL
@PJL SET BITSPERPIXEL = value
Where value is:
1 = 1 bit per pixel (per plane)
FORCE SHORT EDGE FEEDING
PJL
@PJL SET PAPERDIRECTION = value
Where value is one of the following:
SEF = Short Edge Feed
LEF = Long Edge Feed
JOB BASED ACCOUNTING / AUDITRON
PJL
@PJL SET JOBATTR = “@JOAU = string1”
@PJL SET JOBATTR = “@JOAP = string2”
@PJL SET JOBATTR = “@DAID = string3”
Where string1 is:
a maximum of 32 character (legal value: 20H-7EH) as job owner (Capital character & small character is distinguished)
Where string2 is:
a maximum of 12 character (legal value: 20H-7EH) as password without encryption. It can be null (zero length string)
Where string3 is:
a maximum of 32 character (legal value 20H-7EH) as account ID. It can be null (zero length string)
Dependencies/Caveats
Locate all commands in the first 2,500 bytes of the job.
To combine printer PCL escape commands (not including PJL commands):
The first two characters after the
All alpha characters MUST be lowercase, except the final terminating character.
The commands are read left to right. Combine them in the order you wish them executed.
For example, print 5 copies (
In case of duplicate commands, the last one requested takes precedence.
The @PJL SET COPIES takes precedence over the PCL Escape Command (
In general, a PJL command takes precedence over a PCL command.
Valid media sizes for duplexing are between 128.0 x 140.0mm and 297.0 x 432.0mm
Valid media sizes for stapling include A4 (210 x 297mm), A3 (297 x 420mm), B5 (182 x 257mm), B4 (257 x 364mm),
Executive (7.25 x 10.5"), Letter (8.5 x 11"), 8.5 x 13", Legal (8.5 x 14"), Tabloid (11 x 17"), 16K (194 x 267mm), 8K (267 x
388mm), 16K (195 x 270mm), 8K (270 x 390mm) for Finisher A/SB. For Finisher SB, 8 x 10", 215 x 315mm, 11 x 15", A4
Cover, 9 x 11" are also valid.