Xerox WorkCentre 7300 Series Administrator's Manual - page 64
52
19. To exit the screen that lists all assigned and unassigned Mailboxes, press the rectangular Close
button in the upper right corner of the screen.
Configuring Expiration Settings for Stored Documents
This setting allows the System Administrator to set a document expiration timer to delete documents
stored in, but not retrieved from, mailboxes.
1.
Press the Log In / Out button on the Control Panel.
2.
On the keypad enter [11111] or the current password. Touch Enter when finished.
3.
From the Tools tab screen, use the arrow control in the Group menu to scroll to Stored Document
Settings.
4.
Select Mailbox Document Expiration Date and touch Change Settings.
5.
Select On, set the timer controls, and touch Save.
6.
Make any other selections desired, press Change Settings, then press Save.
7.
Press Close to return to the Tools tab screen.
8.
To exit the Tools tab screen, wait several seconds for the Auto Clear service to log you out.
Setting Up Mailboxes with Internet Services
Note: Scanning to the Device's hard drive requires the set up of individual Mailboxes to receive
scanned files. Up to 200 Mailboxes can be set up to support this type of scanning. To set up
Mailboxes, perform the following steps:
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2.
Click the Scan tab.
3.
Select Mailbox in the directory tree.
4.
When the numbered list of Mailboxes is shown, locate an unassigned Mailbox number from the
displayed list and click the Create button for that Mailbox.
5.
Type in a name for this Mailbox in the Mailbox Name entry box.
6.
Type in a pass code in the Passcode entry box.
7.
Confirm the pass code by retyping it in the Re-enter Passcode box.
8.
Use the drop-down arrow to set Check Passcode to Always (recommended) to secure your mailbox.
9.
Place a checkmark in the Delete Documents after Print or Retrieve box if you wish to delete
documents from your mailbox after retrieving same.
10. Place a checkmark in the Delete Documents with Expiration Date box to use this feature in place of,
or as an augmentation to, Auto Delete.
11. Click Apply when done.