Xexun TK-102 User Manual - 5.12 Vibration Alarm
10
5.12 Vibration alarm
It is disabled as default, send “#vibrate#grade level#password#” to tracker (grade level can set 5
levels, 1 is the lowest, 5 is the highest), tracker will reply “vibrate ok!”. “Vibration alarm” will
send to authorized phone number when tracker is being shocked, and one alarm for each shock
event trigger.
Cancel: Send “#novibrate#password#” to cancel the vibration alarm, reply “novibrate OK”
5.13 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the
message to the authorized numbers when it breaches the district.
5.13.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send
SMS: “#stockade#password#semidiameter#time#latitude#longitude#” to unit to set the
restricted district. In case of breach, it will send SMS alert to the authorized numbers every 3
minutes.
Remark: send “#stockade#123456#500#60#22.312451#113.54376#”, 500 represents is the
semidiameter of a circle; 60 represents valid time, if the car exceed the range, it will send alert
to the authorized number after 60 seconds ( valid time default is in second ); latitude and
longitude represent the current location.
5.13.2 Cancel: Send SMS: “#nostockade#password#” to deactivate this function.
5.14 Movement alert
5.14.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS:
“#move#password#” to the unit, then the unit will reply “move ok!”. In case of such a
movement(the unit default distance is 200meters), it will send SMS alert “please attention shift
alarm” to the authorized numbers every 3 minutes.
5.14.2 Cancel: Send SMS:“#nomove#password#” to deactivate the movement alert.