Xexun TK-102 User Manual - 5.21 Gprs Setting
12
5.21.1 Send SMS “#time zone#password#(S)+hour+minute#”. If set OK, it will reply time ok.
For example, if in GMT+8, send SMS “#time zone#123456#S0810#”. S represents the set time
code , 08 represents different time zone hours of tracking time, 10 represents different minutes.
5.21 GPRS setting
User must send SMS via cell phone to set up IP, port and APN before starting GPRS.
5.21.1 Setting up APN
5.21.1.1 APN standards for Access Point Name and differs from country to country. For more
information about the local APN, inquire with your local GPRS network operator.
5.21.1.2 Text the tracker a SMS “#apn#password#APN content#APN user name#APN
password” via a cell phone and if succeeded in setup, the tracker will return the message “APN
OK”.
5.21.1.3 e.g. send SMS command “#APN#123456#CMNET#”. If succeeded, “APN OK” is
returned by the tracker in SMS.
Notes: 123456 refer to password of tracker and CMNET is the APN content of China Mobile
(One of GSM Operator in china, it has no APN user name and password). If there is no APN
user name and password , then no need to write APN user name and password.
5.21.2 IP and port setup
5.21.2.1 Send SMS as below via a cell phone: "#adminip#password#IP Address#Port number#".
If succeeded, “adminip OK” is returned by the device in SMS.
5.21.2.2 e.g, Send SMS command “#adminip#123456##222.101.150.75#9000#” to the tracker
device, If succeeded, “adminip OK” is returned by the device in SMS.( 123456 is default
password, 222.101.150.75 is IP, 9000 is port )
5.22 Modes switch between “SMS” and “GPRS”
5.22.1 The default mode is “GPRS”