Xexun TK-102 User Manual - 5.4 Initialization
6
Put the SIM card and battery in place.
Turn on the unit outdoor by pressing the “on/off” button for 4-5seconds until the indicator is
flashing.
For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4for
instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the
GPS signals. The indicator will keep flashing every 3 seconds when the unit has received
the signals.
When this unit receives GPS signals normally, you can use it and do any setting as the
instructions of this manual.
5.4 Initialization
Send “#begin#password#” in SMS to the unit, it will reply “begin ok” and initialize all the
settings. (Default password: 123456)
For example, send SMS“#begin#123456#” to the tracker via a cell phone, If succeeded,
if will reply“begin ok”.
5.4.1 Reply message with Google link
Send “#smslink#123456#” in SMS to the unit, it will reply message with Google link.
Eg, http://maps.google.com/?q=N22.1211212,E113.080933.
5.5 Change the password
5.5.1 Set Password: Send sms: “#password#old password#new password#” to the unit to
change the password.
For Example, please send sms: “#password#123456#888888#” to terminal device, it will reply
sms: “password OK”. New password 888888 changed in success.