Yamaha AW4416 Manual Supplement - page 12
AW4416 Version 2.0 Manual Supplement
12
Version 2.0 Manual Supplement
If you select a category from the right column of
buttons (SCENE MEM.–REMOTE), move the cur-
sor to the column at the far right, and turn the
[DATA/JOG] dial to select the content within that
category that will be transmitted.
B
REQUEST button
When you move the cursor to this button and
press the [ENTER] key, a “bulk dump request”
message requesting the bulk dump data selected
in 1 will be transmitted from the MIDI OUT
connector/TO HOST connector/option slot.
This button is used when two AW4416 units are
connected by their respective MIDI IN/OUT con-
nectors, and you want to copy scene memory or
library data from one unit to the other.
C
TRANSMIT button
When you move the cursor to this button and
press the [ENTER] key, the bulk dump will begin.
D
INTERVAL
This adjusts the interval that will be left between
data blocks when bulk data is transmitted. You
can set the interval in 1 millisecond units over a
range of 0–300 milliseconds (default= 0).
3
Move the cursor to the button for the bulk
data that you want to transmit, and press
the [ENTER] key.
The corresponding button will be turned on, and
will be selected for bulk dump.
4
If you selected a SCENE MEM.–REMOTE
button, move the cursor to the numerical
box at the right of the button, and use the
[DATA/JOG] dial to select the internal set-
tings that you want to transmit.
Tip!
If you move the cursor to the ALL button located at
the lower left of CATEGORY and press the [ENTER]
key, all settings that can be bulk-dumped will be
selected.
5
Put your MIDI sequencer in record-ready
mode.
When recording bulk data on your MIDI sequencer,
make sure that the MIDI Thru function (sometimes
called “Patch Thru” or “MIDI Echo”) of your MIDI
sequencer is turned off. If this function is on, the bulk
data transmitted from the AW4416 will be immedi-
ately sent back to the AW4416, causing malfunctions.
Category
Values
SETUP MEM.
AW4416 settings other than the
following items
—
PGM. TABLE
Settings of the MIDI screen PGM
ASGN. page
—
CTL. TABLE
Settings of the MIDI screen CTL
ASGN. page
—
SCENE MEM.
The specified scene memory
01–96
Scene number 1–96
EDIT BUFFER
Current scene (current mixer settings)
ALL
All scene memories + current scene
PATCH LIBRARY
The specified patch library
01–20
Library number 1–20
ALL
All patch libraries
CH LIBRARY
The specified channel library
02–64
Library number 2–64
ALL
All channel libraries
EQ LIBRARY
The specified EQ library
41–128
Library number 41–128
ALL
All EQ libraries
DYN. LIBRARY
The specified dynamics library
41–128
Library number 41–128
ALL
All dynamics libraries
EFF. LIBRARY
The specified effect library
42–128
Library number 42–128
ALL
All effect libraries
AUTO MIX
The specified automix
1–16
Memory number 1–16
BUFFER
Current automix
ALL
All automixes + current automix
MIDI REMOTE
Settings of the REMOTE screen
REMOTE A–
REMOTE B
Settings of the REMOTE A (REMOTE A 1-8/9-16
pages) or B (REMOTE B 1-8/9-16 pages)
ALL
Settings of all pages of the REMOTE screen