Yamaha VL-1 Feature Reference - 2: Controller
36
Feature Reference
●
Edit Mode
2: Controller
● Breath Attack Time
≤
5.00msec … 1.24 sec.
Determines how quickly the VL1 responds to changes in breath pressure applied to
the breath controller. A setting of “
5.00msec
” produces the fastest response; “
1.24
sec
” produces the slowest response. This parameter should be used with the “
Breath
Attack Gain
” parameter, below, to determine overall breath controller response.
● Breath Attack Gain
≤
0 … 127.
Determines the amount of audible change produced by a changes in breath pressure
applied to the breath controller. A setting of “
0
” results in no change; “
127
” produces
maximum change. “
127
” is the normal setting for this parameter.
● Touch EG Time
≤
5.00msec … 1.24 sec.
Sets the response time of the VL1 Touch Envelope Generator. The Touch Envelope
Generator controls the transition from the initial key velocity to aftertouch pressure when
a key is played. A setting of “
5.00msec
” produces the fastest response; “
1.24 sec
”
produces the slowest response.
● Polyphony Ctrl
≤
off, Modulation Wheel … 119.
The VL1 allows any physical controller to be used to switch between the mono and
poly key modes while playing. This parameter assigns the desired controller to the key-
mode switching function.
The key-mode switching function is off. This setting automatically
selected when Key Mode set to Mono or Unison.
The selected controller will switch between the Mono and Poly key
modes.
Off
Modulation
Wheel … 119.
•
The key-mode switching function can only be activated (i.e. a controller
assigned) when the Key Mode parameter is set to “
Poly
”.