Yamaha VL-1 Feature Reference - ● Wave
47
Feature Reference
●
Edit Mode
•
Use the ¡ (“>”) and ™ (“<”) buttons to switch between the two pages
of effect parameters.
● Element on/off — E1: & E2:
≤
off, on.
In this parameter the cursor can be positioned at “
E1
:” or “
E2
:” to individually turn
the flanger effect on or off for elements 1 and 2, respectively. When “
on
” the output of
the corresponding element is fed to the input of the modulation stage, and when “
off
”
the modulation stage is bypassed. The “
E2:
” parameter will not appear when editing a
single-element voice.
● Wave
≤
Triangle, Sine, Random.
Selects the waveform which will be used to modulate the flanger effect.
Flanger
Common Effect
● Freq.
≤
0.057 … 40.0 Hz when Triangle or Sine Wave selected,
≤
0.229 … 160.0 Hz when Random Wave selected.
Sets the speed of modulation and therefore the rate of flanger effect variation.
● Depth
≤
0 … 100 %.
Sets the depth of modulation. Higher values produce deeper modulation and there-
fore a more pronounced flanger effect.
Triangle
Sine
Random