Yamaha VL-1 Feature Reference - ● Value
74
Feature Reference
●
Edit Mode
tively little effect. The “
Curve
” setting is reflected in the graph to the right of the
parameters — the horizontal axis represents the controller value and the vertical axis
represents breath noise.
● Value
≤
0 … 127.
Determines the amount of breath noise produced when the “
Controller
” param-
eter is set to “
off
”. The higher the value the greater the effect.
•
No breath noise can be applied via any controller if the ELEMENT MISCEL-
LANEOUS Breath Noise page “
Level
” parameter is set to “
0
” or the “
Con-
trol Balance
” parameter is set to “
63
” (
≥
Page 86).
9: Growl
•
The § and ¶ buttons (“
Bpag
” and “
Fpag
”) can be used to go directly
backward or forward to the next Element Controller page without having to
return to the directory.
•
The • button (“
Para
”) can be used to go directly to the Growl parameter
page (
≥
Page 141), also available from the ELEMENT ENVELOPE direc-
tory. You can then return to the controller Growl page by pressing •
(“
Ctrl
”) again.
● Controller
≤
off, Modulation Wheel … Touch EG (124 settings).
The “Growl” parameter produces a periodic pressure modulation which produces
the “growl” effect often heard in wind instruments. An extensive range of parameters
allow remarkably realistic effects. The “
Controller
” parameter specifies the controller
to be used for growl control. When set to “
off
” no growl variation can be produced, but
an absolute growl value can be set via the “
Value
” parameter, below.
● Depth
≤
-127 … 127.
Sets the amount of variation produced by the controller assigned to growl. The
higher the value the greater the variation. Positive values cause an increase in growl