Zebra MtP400 Operator's Manual - page 22

Printer Configuration 

Entering Setup 

To enter Setup, press and hold the   Enter Button while turning on the printer with the   Power Button.  

Continue to hold the Enter Button until “Menus Active” appears on the LCD Display.  After releasing the   

Enter Button, “Entering Setup Menus” will be displayed momentarily before advancing to the “FORMAT 

MENU

”.  While in Setup Mode, the power indicator will blink slowly.   

Selecting Menus 

Once Setup Mode has been successfully entered, the “FORMAT MENU” is the first menu displayed.  Note that 

while in Setup Mode, the   Paper Feed Button now operates as an   Advance Button.  To advance to the 

INTERFACE MENU

 or OPTIONS MENU, or to Exit Setup, press the   Advance Button until the desired 

menu is displayed.  With a few exceptions which are described where appropriate, pressing the   Advance 

Button will always advance you to the next menu. 

Detailed explanations on how to navigate each of the menus and use their features follow. 

Exiting Setup 

Setup may be exited by pressing the   Advance Button until “Exit Setup” is displayed on the top line of the 

LCD Display, and “Save Changes” is displayed on the bottom line.  To save any changes you have made 

and exit Setup press the   Enter Button.  If feature values were changed, “Exiting Menus Saving 

Changes

” will be displayed.  If no values where changed, “Exiting Menus No Changes” will be 

displayed. 

If you do not want to save the changes you have made, press the   Increment Button to display “Discard 

Changes” on the bottom line and then press the   Enter Button.  “Exiting Setup No Changes” will be 

displayed. 

After Setup is exited and any changes saved, the printer will reset and reinitialize itself to adopt any changes 

that may have been made.  Note that when this reset occurs, any data that may have been in the input buffer will 

be discarded. 

Setup Menu Summary 

The following table is a summary of the features and possible values available in the Format, Interface, and 

Options Menus.  This table may be used to help locate a particular item, or as a “quick reference” for the Setup 

menu system. 

16