Zebra MtP400 Operator's Manual - Options Menu

Printer Configuration 

Tunnel Port Number 

Tunnel Port# 

08023

Possible Values:  00000 … 08023* … 65384 

This feature specifies the TCP/IP port to be used for data that is to be printed.. 

To advance through the character positions, press the   Advance Button.  To change the character at the current 

position, press the   Increment Button. 

Note: This feature is available in printers with firmware revision 2.0 and higher. 

Options Menu 

OPTIONS MENU 

The OPTIONS MENU contains features that affect how the printer operates regardless of how features in other 

menus have been set. 

After entering Setup as described earlier in “Setup Basics”, press the   Advance Button until “OPTIONS 

MENU

” is displayed on the top line.  You may now do one of the following: 

press the   Enter Button to review and/or change the features available, or 

press the   Advance Button to advance to the TEST MENU

Pressing the   Enter Button will advance through the following features in the order shown below.   

Maximum Format Number 

Max Formats 

Format 1

Possible Values:  Format 1* … Format 5

This feature sets the highest Format number to be displayed in the Format Menu.  This allows the operator to 

see only the formats that are in use rather than having to potentially sort through several unused formats. 

Note that when changing the value of this feature, you may not select a value less than the value currently set in 

the Format Menu. 

29