Zebra MtP400 Operator's Manual - Media Specifications

Specifications 

Media Specifications 

Receipt Paper 

  General Specifications:  0.0022 to 0.0065” (0.056 to 0.089mm) Thick 

Black Mark Sensing On Printed Side  

(Black Mark Sensing On Back Side  and Gap Sensing On MtP400 LP Models) 

MtP400, MtP400 LP:  3 to 4.125” (76.2 to 104.78mm)Wide  

(Roll Media)         0.750” (19.05mm) Inside Diameter Core 

2.625” (66.68mm) Maximum Outside Diameter 

MtP400 SL:  3 to 4” (76.2 to 101.6mm) Wide 

(Preloaded Cassette)   6” Maximum Length 

100 Sheets Maximum Per Cassette 

Approved Vendors:  Kansaki:  P300, P310, P350, P354, P390*, P530UV, TO281CA,  

               OP200, TO381N, F180, F380, F550 

  Jujo:  TF-50KS-E2C 

  Honshu:  FH65BV-3 

  Appleton:  Resiste 900-3.0* 

     *Standard Printek Offering 

Labels 

MtP400:  0.0022 to 0.0065” (0.056 to 0.089mm) Thick 

0.750” Inside Diameter Core  

Black Mark Sensing On Printed Side 

2.625” Maximum Outside Diameter  

4.125” Maximum Width (carrier) 

MtP400 LP:  0.0022 to 0.0065” (0.056 to 0.089mm) Thick 

0.750” Inside Diameter Core  

Black Mark Sensing On Printed Side Or Back Side 

Gap Sensing Between Labels  

2.625” Maximum Outside Diameter  

4.125” Maximum Width (carrier) 

51