Zebra MtP400 Operator's Manual - Format Menu
Printer Configuration
Setup Menu Summary
Format Menu
Interface Menu
Format n Serial
IrDA
Bluetooth
Wi-Fi
Options Menu
Format Name
Up to 16 Characters
Font
4.2, 5.5, 10.2, 10.7,
18.5, 20.3 SansSerifA;
12.7, 13.5, 14.5, 15.6,
16.9*, 18.5, 20.3, 22.6,
25.4 Courier
Spacing
0 - 10, 3*
Left Margin
0* - 1.0244”
Right Margin
0* - 1.2608”
Print Contrast
-75 to +125, 0*
Max Paper Speed
0.32 to 3.30* ips
(SL = 2.30*)
Form Feed Distance
0 – 2.5216”, 1.2608*
Mark Sensing
Front*, Back, Gap
Mark Sensitivity
-10 to +10, 0*
Gap Sensitivity
-10 to +10, 0*
Emulation
Printek*, O’Neil,
ZPL-II, Mt3,
CPCL, Hex Dump
Baud Rate
9600, 19200,
38400, 57600*
Data Bits
7, 8*
Stop Bits
1*, 2
Parity
None*, Even,
Odd
XON/XOFF
Off*, On
ETX/ACK
Off*, On
RTS/CTS
Off, On*
Emulation
Printek*,
O’Neil,
ZPL-II,
Mt3,
CPCL,
Hex Dump
Emulation
Printek*, O’Neil,
ZPL-II, Mt3,
CPCL, Hex Dump
Pairing Mode
Paired*, Unpaired
Pin
0*, Up to 16
Numeric Chars.
Security
Off*, On
Local Name
MtP400*
Address
(Displayed Only)
Emulation
Printek*, O’Neil,
ZPL-II, Mt3,
CPCL, Hex Dump
WLAN Type
Infrastructure*,
Peer-to-Peer
WLAN Channel
1* – 14
WLAN SSID
any*
WLAN WEP Bits
0*, 64, 128
WEP Key
10 or 26 Char.
Hex String
WLAN Auth
Auto*, Open,
Shared
IP Address Assign
DHCP*, Static
IP Address
192.0.0.192*
IP Subnet Mask
255.255.255.0*
IP Gateway
192.168.0.0*
Tunnel Port#
08023
Max Format #
1* – 5
Auto Power Down
Off*,
1 – 15 Minutes
User Language
English*, French,
German
Truncate Lines
No*, Yes
Format Menu
FORMAT MENU
Current Format
The MtP400 supports five “Formats”, or sets of printing parameters that may be selected either through the
control panel or by host application programs. These Formats include printing related features such as Form
Length, Font, Character Pitch, Margins, etc. Each Format also includes the ability to name the Format with a
name such as “Receipt”, “Routing Label”, or “Shipping Label”, etc.
Upon entering Setup as described earlier in “Setup Basics”, the Format Menu is the first menu that will appear.
17