2gig Technologies GC3 User Manual - page 20
Proprietary & Confidential
3 Touchscreen Basics
System Status Messages
At the top-left of the screen, different messages appear to reveal the current system state.
Figure 3
System Status Messages
This table describes the different system status messages on the system.
Table 3-2
System Status Messages
This system status message…
Indicates that…
System Ready To Arm
All protected doors and windows are closed.
System Not Ready to Arm
One or more protected doors or windows are open.
System Ready To Arm (BYPASS)
The system is ready to arm and one or more sensors are on the Bypassed Sensors list. See "Force Bypassing" on
page 32.
System Arming (STAY)
The system is in the process of arming itself in Stay Mode.
System Arming (AWAY)
The system is in the process of arming itself in Away Mode.
System Armed
The system is armed and protecting the premises.
Restarting Security Process
The security system is restarting. Typically, this only appears after an installer modifies a System Configuration
setting.
System Icons
The status bar that appears on the top of the Home screen and on most system menus reveals a variety of icons providing system information and access to
different functions.
Figure 4
System Icons
Table 3-3
System Icons
USB Update
Incoming Messages
No Bookmark
Add Bookmark
Go to Bookmark
Dim Touchscreen
System Volume ON
Non-Critical Sounds OFF
System on AC Power
System NOT on AC Power
Low Backup Battery
Copyright © 2015 Nortek Security & Control LLC
20