2gig Technologies GC3 User Manual - page 52
Proprietary & Confidential
8 Smart Home Controls
Scenes
Use the Scenes screen to create scenarios that define simple rules for
how your Z-Wave home automation devices work together. There is no
functional limit on the number of scenes that you can create to control
lights, home automation devices, and other alarm sensors.
Figure 5
Smart Home Controls > Scenes
E x a m p l e s :
W h e n
t o
C r e a t e
S c e n e s
There are a wide variety of scenes that you can create. Some of
the more common include:
Watch a Movie: Create a scene named "Movie" to switch
OFF the lights, close the media room curtain, and turn on the TV
at the press of a button.
Retire for the Night:
Create a scene name "Good Night" to
close the home's curtains, switch OFF the downstairs lights, lock
the entry doors, illuminate a nightlight in the dwelling's hallways,
and arm the alarm system in Stay mode.
Wake Up in the Morning: Create a scene named "Good
Morning" to open the homes curtain's, unlock the entry doors,
turn OFF hallway nightlights, and disarm the alarm system.
Add a New Scene
To add a new scene:
1.
Navigate to the Smart Home Controls menu. See "Navigate to
the Smart Home Controls Menu" on the previous page.
2.
At the Smart Home Controls menu, tap Scenes.
3.
At the Scenes screen, tap Edit Scenes.
Figure 6
Scenes > Edit Scenes
4.
At the Scenes screen, tap Add New Scene.
Figure 7
Add New Scene
5.
Enter a name for the new scene. Then tap Next.
For example, enter: Movie.
Figure 8
Enter a Name for the New Scene
6.
Create a new scene (see "Add a New Scene" above) or tap the
Scene that you want to edit.
7.
At the
Figure 9
Edit Scene > Add or Remove Items
8.
Tap the arrow that corresponds to the desired smart home
control.
For example, tap the arrow next to Lights.
Copyright © 2015 Nortek Security & Control LLC
52