2gig Technologies GC3 User Manual - page 64
Proprietary & Confidential
10 System Settings
1.
At the Home page, tap System Settings.
2.
Enter your four-digit user code to access the System
Settingsmenu.
3.
Tap Users.
4.
Tap the pencil icon next to the desired user.
5.
Make the desired changes on the Edit User page. See "Editing
Options" below.
6.
Tap t when finished.
Editing Options
When editing a user, you have these options:
Change the User Status to Active or Inactive
To change the user status to active or inactive:
1.
Open the Edit User page. See "Editing a User" on the previous
page.
2.
If you want to make the user profile inactive, move the Active
slide control to the left.
3.
(Optional) If you want to make the user profile active, move the
slide control to the right. This is the factory default setting.
Change a User Name
To change a user name:
1.
Open the Edit User page. See "Editing a User" on the previous
page.
2.
Tap the pencil icon next to the user name.
3.
At the Enter a Name for the User screen, enter a new user
name.
4.
Tap Done.
Change a User Code
To change a user code:
1.
Open the Edit User page. See "Editing a User" on the previous
page.
2.
Tap the pencil icon next to the user code.
Copyright © 2015 Nortek Security & Control LLC
64