2gig Technologies GC3 User Manual - page 63
Users
The Users menu lets you add, edit, and delete users from the system.
NOTE:
This feature is PIN-protected. To use this feature,
you must know the four-digit Master User Code.
Types of User Codes
There are different types of user codes to provide users with access to
various system features:
IMPORTANT:
Do Not Share Your User Codes. Operators
at the Central Station may need to review the codes used to
determine your identity. The codes entered may need to be
used as a decision-making tool for dispatching emergency
assistance.
User Code:
A unique, four-digit code to identify different system
users and provide them with the ability to disarm the system.
Master User Code:
A four-digit code typically known by one or
two members of a household. The default code is 1111. To
secure this code, it is recommended that you immediately change
the default code to a unique one.
Duress Code:
A four-digit code that you enter to silently notify
your Remote Service Provider of an emergency event, such as
being forcibly held against your will by an intruder. The default
code is 6789.
Installer Code:
A four-digit code that provides professional
installer's and 2GIG alarm dealers with access to the system's
programming functions.
Adding a User
You can add new users to the system. The system supports a total of 100
four-digit pass codes (this includes both the Master User Code
and Duress Code).
To add a user:
1.
At the Home page, tap System Settings.
2.
Enter the Master User Code to access the System Settings
menu.
3.
At the System Settings menu, tap Users.
This reveals the Users screen. If this is the first time you are
adding a user, you will notice that two (2) users have already
been created. The Master User and the Duress user.
4.
Tap Add User.
5.
At the Enter a Name for the New User screen, enter a name
for the new user. Then tap Next.
6.
At the Enter a Code for User
four-digit code for the new user. Then tap Next .
7.
NOTE:
If you attempt to add a code that is already in
use, the system prompts you to enter a different
code. Every user code must be unique.
The new user name and code appears in the Users page.
8.
Tap t when finished or continue with the steps in "Editing a User"
below
Editing a User
To edit a user:
10 System Settings
Proprietary & Confidential
63
Copyright © 2015 Nortek Security & Control LLC