3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual - page 145
Configuring ARP Settings
145
Defining ARP Settings
The
ARP Settings Setup Page
allows network managers to define ARP
parameters for specific interfaces.
Monitor users have no access to this page.
To configure ARP entries:
1
Click
Administration > ARP Settings > Setup
. The
ARP Settings Setup
Page
opens:
Figure 76
ARP Settings Setup Page
The
ARP Settings Setup Page
contains the following fields:
■
IP Address
— Defines the station IP address, which is associated with
the MAC address. Note that this address must be within the same IP
subnet as that assigned to the switch (see
Defining IP Addressing
on
page 142).
■
MAC Address
— Defines the station MAC address, which is
associated in the ARP table with the IP address.
■
ARP Entry Age Out
— Specifies the amount of time (in seconds) that
passes between ARP Table entry requests. Following the
ARP Entry
Age
period, the entry is deleted from the table. The range is
1-86400
seconds. The default value is
1200
seconds.
2
Define the fields.
3
Click
. The ARP parameters are defined, and the device is
updated.