3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual - page 69
Defining Local Database Authentication
69
Configuring Port
Settings
The
Local Database Port Setup Page
allows the network administrator to
configure local-database protocol settings for the selected port.
Monitor users have no access to this page.
To display protocol settings for Local Database Authentication:
1
Click
Port > Local Database > Port Setup
. The
Local Database Port
Setup Page
opens:
Figure 32
Local Database Port Setup Page
The
Local Database Port Setup Page
contains the following fields:
■
Status
— Configures the administrative status of local-database
authentication for a port. The possible field values are:
■
Enabled
— Enables local database authentication on the device.
■
Disabled
— Disables local database authentication on the device.
This is the default.
■
No Change
— Retains the current port status.
■
Quid Period
— Displays the amount of time a host must wait after
exceeding the limit for failed login attempts, before it may attempt
local-database authentication again. The field range is
1-600
seconds,
and the default is
60
seconds.
■
Login Attempts
— Displays the limit on failed web authentication
login attempts. After the limit is reached, the switch refuses further
login attempts until the quiet time expires. The field range is
1-3
attempts, and the default is
3
attempts.