3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual - page 180
180
C
HAPTER
13: C
ONFIGURING
Q
UALITY
OF
S
ERVICE
Defining Bandwidth
Settings
The
Bandwidth Setup Page
allows network managers to define the
bandwidth settings for a specified interface. Interface shaping can be also
be applied to the egress traffic on a specified interface.
Monitor users have no access to this page.
To configure Bandwidth Settings:
1
Click
Device > QoS > Bandwidth > Setup
. The
Bandwidth Setup Page
opens:
Figure 96
Bandwidth Setup Page
The
Bandwidth Setup Page
contains the following fields:
Ingress Rate Limit
■
Enable Ingress Rate Limit
— Enables setting an Ingress Rate Limit.
■
Ingress Rate Limit
— Defines the ingress traffic limit for the port. The
field options include 128, 1024, 5056, 10048, 50048, 100032 and
500032 kbits per second.
When using the command line interface, the field range is
64-100,000
kbits per second for Fast Ethernet ports, and
64-1,000,000
kbits per second for Gigabit Ethernet ports
at a resolution of 64 kbits per seconds.