3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual - page 164
Manual is about: User Guide
of
256
164
C
HAPTER
12: C
ONFIGURING
SNMP
Setting SNMP Agent
Status
SNMP services can be enabled or disabled for all management clients
(that is, versions 1 and 2c) using the
SNMP Setup Page
.
Monitor users have no access to this page.
To set the operational status for SNMP:
1
Click
Administration > SNMP > Setup
. The
SNMP Setup Page
opens:
Figure 84
SNMP Setup Page
The
SNMP Setup Page
contains the following fields:
■
SNMP Agent Status
— Specifies
if SNMP is enabled on the device.
The possible field values are:
■
Enabled
— Enables SNMP on the device.
■
Disabled
— Disables SNMP on the device.
2
Set the status field.
3
Click
. The SNMP agent status is defined, and the device is
updated.