3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual - page 178
178
C
HAPTER
13: C
ONFIGURING
Q
UALITY
OF
S
ERVICE
2
Define the trust mode.
3
Click
. The selected Trust mode is enabled on the device.
Viewing Bandwidth
Settings
The
Bandwidth Summary Page
displays bandwidth settings for each
interface.
To view Bandwidth Settings:
1
Click
Device > QoS > Bandwidth > Summary
. The
Bandwidth
Summary Page
opens:
Figure 95
Bandwidth Summary Page
The
Bandwidth Summary Page
contains the following fields:
■
Interface
— Displays the interface for which rate limit and shaping
parameters are defined.
Ingress Rate Limit
■
Status
— Indicates the ingress rate limiting status on the interface.
The possible field values are:
■
Enabled
— Ingress rate limiting is enabled on the interface.
■
No Limit
— Ingress rate limiting is disabled on the interface. This is
the default.
■
Rate Limit
— Indicates the ingress traffic limit for the interface. The
field options include 128, 1024, 5056, 10048, 50048, 100032 and
500032 kbits per second.