3Com 5500G Configuration And Command Reference Manual - page 24
24
Chapter 3: Configuring an Application Control System Exchange Interface
Closing an ACSEI
Client
Follow these steps to close an ACSEI client:
c
CAUTION:
After you use the
acsei client close
command to close an
ACSEI client, the OSN|M with which the ACSEI client is integrated is shut
down.
Restarting an ACSEI
Client
Follow these steps to restart an ACSEI client:
c
CAUTION:
After you use the
acsei client reboot
command to restart an
ACSEI client, the OSN|M with which the ACSEI client is integrated is
restarted.
Enter ACSEI server view
acsei server
-
Configure the monitoring
timer for ACSEI server to
monitor ACSEI client
acsei timer monitor
seconds
Optional
Five seconds by default.
To... Use
the
command...
Remarks
To... Use
the
command...
Remarks
Enter system view
system-view
-
Enable the ACSEI server
function
acsei server enable
Required
Enter ACSEI server view
acsei server
-
Close the specified ACSEI
client
acsei client close
client-id
Required
To... Use
the
command...
Remarks
Enter system view
system-view
-
Enable the ACSEI server
function
acsei server enable
Required
Enter ACSEI server view
acsei server
-
Restart the specified ACSEI
client
acsei client reboot
client-id
Required