3Com 5500G Configuration And Command Reference Manual - Commands On The Osn|M
47
7 ACSEI Client Configuration
Commands on the OSN|M
n
You can execute the following commands in any directory of the Linux
system. You can use the
osm connect unit
command in the switch’s user
view to enter the OSN|M’s Linux system. For description of the
osm
connect unit
command, refer to “osm connect unit” on page 31.
acsei-client debug disable
Syntax
acsei-client debug disable
View
Any directory of the Linux system
Parameters
None
Description
Use the
acsei-client debug disable
command to disable debugging for
the ACSEI client.
By default, debugging for the ACSEI client is disabled.
Examples
# Disable debugging for the ACSEI client on unit 1.
Connected to OSM!
[root@localhost ~]# acsei-client debug disable
acsei-client debug enable
Syntax
acsei-client debug enable
View
Any Linux system directory