3Com 5500G Configuration And Command Reference Manual - 4 Osn|M Configuration
4 OSN|M Configuration
Commands
osm connect unit
Syntax
osm connect unit
unit-id
View
User view
Parameters
unit
unit-id:
Specifies a switch by its unit ID.
Description
Use the
osm connect unit
command to switch from the command line
interface on the local switch to the Linux OS on the OSN|M. You can
specify the unit ID of the local switch or the unit ID of another switch in
the same fabric as the local switch.
Press
Ctrl+K
to return from the OSN|M’s Linux OS to the local switch’s
command line interface.
Only one user can switch to the OSN|M’s Linux OS at a time.
Examples
# Switch from the local switch’s command line interface to the OSN|M’s
Linux OS on unit 1.
Connected to OSM !
# Press
Enter
after the above prompt is displayed. If the Linux OS is
running on the OSN|M, the operating interface is switched to the Linux
OS.
[root@localhost ~]#
# Press
Ctrl+K
to return to the local switch’s CLI.