A&D HV-200KGL-WP Instruction Manual - page 19
HVG-WP Series
Page 17
7.1.2.
Type L with Rechargeable batteries
Step 1 Confirm nothing is placed on the weighing pan.
Step 2 Plug AC adapter into mains power.
Step 3 Connect AC adapter to the scale and charging begins.
Step 4 Disconnect AC adapter from the scale after charging 16 hours.
Step 5 Turn on the scale using the
ON/OFF
key.
Step 6 Check the accuracy of weighing. Allow 30 minutes warming up before calibration.
Step 7 With nothing on the pan, press the
ZERO
key to display zero.
Step 8 Place an article on the weighing pan gently.
Step 9 Wait for the stability mark to be displayed. Read the weight.
Step 10 Remove the article from the weighing pan.
Step 11 Turn the scale off using the
ON/OFF
key.
Caution
Do not remove rechargeable batteries from the display.
15
5
30 60
10 15