A&D HV-200KGL-WP Instruction Manual - page 41
HVG-WP Series
Page 39
Step 6 Press the
MODE
key to display the blinking HI (of the
final value).
Step 7 Set the final value using the following keys.
∧
key
Adjusts the value of a figure.
<
key
Selects a figure.
Step 8 Press the
ENTER
key to store the new parameter and
display the blinking OK (of preliminary value).
Step 9 Set the preliminary value using the following keys.
∧
key
Adjusts the value of a figure.
<
key
Selects a figure.
Step 10 Press the
ENTER
key to store the new parameter and
display the blinking LO (of zero band).
Step 11 Set the zero band using the following keys.
∧
key
Adjusts the value of a figure.
<
key
Selects a figure.
Step 12 Press the
ENTER
key to store the new parameter and
return to the weighing mode.
13.2.Operation and Performance (Examples)
Step 1 Select the parameter
f6 8
of the function table.
Step 2 Set the parameters of the final value, preliminary value and zero band.
Step 3 The comparison result is always displayed.