A&D HV-200KGL-WP Instruction Manual - page 38
Page 36
HVG-WP Series
Step 8 Press the
MODE
key to display the blinking HI (of the
final value).
Step 9 Set the final value using the following keys.
∧
key
Adjusts the value of the flashing of a
figure.
<
key
Selects a different flashing figure.
Step 10 Press the
ENTER
key to store the new parameter and
display the blinking OK (of preliminary value).
Step 11 Set the preliminary value using the following keys.
∧
key
Adjusts the value of the flashing of a
figure.
<
key
Selects a different flashing figure.
Step 12 Press the
ENTER
key to store the new parameter and
display the blinking LO (of zero band).
Step 13 Set a zero band which is greater than the tare value,
using the following keys.
∧
key
Adjusts the value of the flashing of a
figure.
<
key
Selects a different flashing figure.
Step 14 Press the
ENTER
key to store the new parameter and
return to the weighing mode.