A&D HV-200KGL-WP Instruction Manual - page 29
HVG-WP Series
Page 27
automatically. The next accumulation can be performed after the
display is near-zero.
Use
Recording the number and mass of articles removed form
the weighing pan. (Put the articles on the weighing pan.
Press the
TARE
key at each removal.)
A
A
A
A
A
f8 5
At each finish of the full/dribble batch function, the scale accumulates
the data automatically.
Use
Packaging articles like a powder, it is used for recording the
bag number and total mass.
A
A
A
10.1.Preparation (Setting Parameters)
Step 1 Turn off the display.
Press
the
ON/OFF
key while the
ZERO
key is
pressed and held. The function table is displayed.
Step 2 Press the
ENTER
key to repeately until F8 is
displayed.
Step 3 Select a parameter for the accumulation function
(
f8 1
~
f8 4
) with the
∧
key.
Step 4 Press the
ENTER
key to store the new parameter.
Press
the
F
key and the
ENTER
key to exit from
the function table. Then the scale returns to the
weighing mode.
.