Access 902 User Manual - page 15
14
To Lockout or Unlock System, PRESS:
1) SECURE • 1 • SECURE*
2) ▲ or ▼ toggles between 'ON' (locked out) & 'OFF' (unlocked)
3) SECURE*
“LO” appears in 3 character window when system is locked out.
If 'coB' appears in 3 character display window, enter 3-digit Code A or Code B, described in
Step 4.
4) # • # • # • SECURE*
SECURE 2 – Product Group Lockout
Deselects all products in the affected Product Group and prevents any product in the group from being
selected. Multiple Product Groups may be locked out one Product Group at a time.
- Secure 91 must be on to use this feature
To Lockout a Product Group:
1) Press Select Key of Product Group to Lockout
2) SECURE • 2 • SECURE*
“LO” appears in selected Product Group window.
To Unlock a Product Group:
1) Select locked Product Group by pressing its key, then PRESS
2) SECURE • 2 • SECURE*
If “coB” appears in 3 character display window, enter 3-digit Code A or Code B, described in
Step 3.
3) # • # • # • SECURE*
SECURE 3 – SPL AutoLimiting (902 Only)
This feature uses the 902’s EVC microphone to monitor the Sound Pressure Level (SPL) in the demo area. If
the SPL reaches a preset limit (set by Manager with SECURE 93), the Control Panel will automatically engage
Muting Level 2 to reduce the SPL below the allowable threshold.
- Secure 91 must be on to use this feature
To Engage or Disengage SPL AutoLimiting Feature, PRESS:
1) SECURE • 3 • SECURE*
2) ▲ or ▼ toggles between ON (AutoLimiting Engaged) & OFF (AutoLimiting Disengaged)
3) SECURE*
If 'coB' appears in 3 character display window, enter 3-digit Code A or Code B, described in
Step 4.
4) # • # • # • SECURE*
LED beside the SECURE Key will remain ON when this feature is engaged.