Access 902 User Manual - page 19
18
SECURE 98 – Specify a Range of Systems to Write Protect
Allows a range of systems (1-99) to be specified for write protection. The command sequence will prompt
you to specify the Low and High numbers in the range to be protected.
- Secure 91 must be on to use this feature.
To specify a range of systems to Write Protect, PRESS:
1) SECURE • 9 • 8 • SECURE*
“L##” appears in 3 character window.
2) Use the ▲ or ▼ Keys to select the lowest system number in the range.
Use the C-Key as a deleting backspace key if needed.
3) SECURE*
4) Use the ▲ or ▼ Keys to select the highest system number in the range.
5) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 6.
6) # • # • # • SECURE*
Using Product Selector Buttons
Product Selector Buttons offer a very friendly interface that encourages self-service. They also make a power-
ful addition to the merchandising flexibility of systems that use Control Panels. If you have both a Control
Panel and Product Selector Buttons, notice that the Product Selector Buttons communicate with the Control
Panel and vice versa through the bi-directional architecture of your system. Any selection made with a
Product Selector Button will be confirmed by the Product Selector Button’s LED and in the selected
component’s Product Group window on the Control Panel.
Usually, Product Selector Buttons are located adjacent to the component they select. To use a Product Selector
Button, simply PRESS it momentarily. The green LED will light and your selection will play, assuming you
have source material. PRESSing an alternate component’s Product Selector Button will activate the new
selection and deactivate the previous selection. To turn a selected component OFF, simply PRESS its Product
Selector Button.
One can play multiple pairs of speakers using Product Selector Buttons by adding additional pairs to the
current selection (the maximum number of pairs allowed is determined at installation). To add a pair of
speakers to the current selection, LPRESS the Product Selector Button for the set of speakers you wish to add.
To deselect one of the multiple pairs playing, PRESS its Product Selector Button.
Using the 905 Remote Control
The 905 IR Remote is very easy to use. Every system feature is available from the remote (version 3.4 and
later Control Panels, use Secure 89 to determine your version). To use the 905, point it in the direction of the
Control Panel or Model 990 External IR Receiver and enter your command. The keystrokes and functions
work exactly like the keypad on the Control Panel, except for selecting the active Product Group.
To SELECT a Product Group from the remote numerically, PRESS the GROUP button on the remote, then key-
in the desired Product Group number (1 – 32 starting at the top of the Control Panel), and PRESS the ENTER-
Key.
You can also use the ▲ and ▼ ARROW keys to SELECT a Product Group by PRESSing the GROUP key, then
using the ▲ or ▼ ARROW to move to the desired Product Group.