Access 902 User Manual - page 17
16
SECURE 92 – Specify a Default System Selection
When on, provides the capability for the control panel to automatically activate a 'default' system after a
specified period of input inactivity at the Control Panel or Product Selector Buttons.
- Secure 91 must be on to use this feature.
To Specify a Default System Selection or Turn Feature OFF:
1) Select desired system on Control Panel, then PRESS:
2) SECURE • 9 • 2 • SECURE*
3) “OFF” (feature disabled) or “##” (feature ON) minutes will be shown.
4) Press ▲ or ▼ Keys to set the number of minutes of inactivity to activate the default system.
PRESSing ▼ until “OFF” appears in 3 character window turns feature off.
5) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 6.
6) # • # • # • SECURE*
SECURE 93 – Set SPL AutoLimiting Threshold (902 Only)
Allows the Manager to change the value for the maximum Sound Pressure Level (SPL) threshold, used for
Secure Feature #3 “SPL AutoLimiting.” The default value from the factory is 85dB.
- Secure 91 must be on to use this feature.
To change the SPL AutoLimiting Threshold, PRESS:
1) SECURE • 9 • 3 • SECURE*
“##” appears in prompt window to indicate current SPL value.
2) Enter desired value with numeric keypad.
3) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 4.
4) # • # • # • SECURE*
SECURE 94 – EVC AutoCalibration Master On/Off (902 Only)
Allows the EVC AutoCalibration feature to be disabled. This may be desirable when management does not
want AutoCal run indiscriminately, or wants to prevent custom EVC attenuation settings from being auto-
matically overwritten by AutoCal.
- Secure 91 must be on to use this feature.
To Turn the AutoCal feature On or Off, PRESS:
1) SECURE • 9 • 4 • SECURE*
2) Use the ▲ or ▼ keys to toggle between “ON” (AutoCal enabled) & “OFF” (AutoCal disabled).
3) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 4.
4) # • # • # • SECURE*