Access 902 User Manual - page 18
17
SECURE 95 – TheftAlert Master ON/OFF
Allows the TheftAlert Merchandise Sentinel feature to be turned on or off. Also useful if the display contains
products that trigger false alarms.
- Secure 91 must be on to use this feature.
To Turn TheftAlert On or Off, PRESS:
1) SECURE • 9 • 5 • SECURE*
2) Use the ▲ or ▼ keys to toggle between “ON” (TheftAlert enabled) & “OFF” (TheftAlert disabled).
3) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 4.
4) # • # • # • SECURE*
SECURE 96 – Systems Write Protection Feature ON or OFF
Write Protection prevents inadvertent or unauthorized changes to management’s stored systems. When the
Systems are Write Protected (this feature ON), over-writing a stored system requires the entry of the Manager
Code (Code A). Given this, if there are several Write Protected systems to change, it is easiest to turn this
feature OFF temporarily to eliminate the Code A prompt, then turn if back ON, once editing is completed.
- Secure 91 must be on to use this feature.
To Turn Systems Write Protection ON or OFF, PRESS:
1) SECURE • 9 • 6 • SECURE*
2) Use the ▲ or ▼ keys to toggle between “ON” (Write Protect enabled) & “OFF” (Write Protect
disabled).
3) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 4.
4) # • # • # • SECURE*
SECURE 97 – Set System Write Protect Status for Current Selection.
Provides a quick method for setting an individual system's Write Protect status. For setting write protect
status for a range of systems use Secure 98.
- Secure 91 must be on to use this feature.
To Write Protect/Unprotect a Single System, PRESS:
1) SECURE • 9 • 7 • SECURE*
2) Use the ▲ or ▼ keys to toggle between “ON” (Write Protect enabled) & “OFF” (Write Protect
disabled).
3) SECURE*
If “coA” appears in 3 character display window, enter 3-digit Code A in Step 4.
4) # • # • # • SECURE*