Accu-Chek Mobile User Manual - Checking The Meter

175

Checking the meter 7

Checking the meter

7 

you can check whether the meter delivers correct 

results. To perform this control test, a glucose control 

solution is applied to the test area instead of blood. At 

the end of the test, the meter automatically checks 

whether the result obtained with glucose control solu-

tion is correct and informs you of the result. 

Always perform a control test using Accu-Chek Mobile 

control solutions:

after you have inserted a new test cassette,

after you have changed the batteries,

after you have cleaned the cassette and the inside of 

the meter,

if you are in doubt about a result.

Please ask Accu-Chek Customer Care where you can 

obtain the control solutions.

different control solutions are sold in different coun-

tries. The control solutions have different colored labels 

(red, blue or white). At the end of the control test, the 

meter asks you to enter the color of the label on the 

control solution you have used (see Chapter 7.2). The 

meter offers you a choice of all three colors, even if 

you only have one or two control solution(s) to choose 

from.

  Visually impaired people should not carry out a 

control test without assistance from a sighted 

person.