Accu-Chek Mobile User Manual - page 75

75

Testing blood glucose 3

2 

Take your finger away from the test area as soon 

as 

Test in progress

 and the hourglass symbol 

appear on the display.

The test area has then absorbed enough blood and a 

beep sounds (if 

Beeper

 is turned on). The hourglass 

symbol indicates that the test is in progress.

Testing is complete after approximately 5 seconds. The 

result appears on the display and the meter beeps (if 

Beeper

 is turned on). At the same time the meter 

automatically saves the result. The used test area is 

transported away from the tip of the cassette.

If you want to flag the result do not turn the meter off. 

The procedure for flagging results is described under 

“Flagging results”. 

If you do not wish to flag the result you can now turn 

off the meter (see next page).