Accu-Chek Mobile User Manual - page 177

177

Checking the meter 7

7.2  Performing a control test

Start as for a blood glucose test: either open the tip 

cover or select 

Test

 in the 

Main menu

. 

The following description assumes that you start the 

test by opening the tip cover.

1 

Place your finger on the corrugated area on the tip 

cover and push in the direction of the arrow as far 

as it will go. 

After overcoming a slight resistance, the tip cover 

clicks into place.

  Be careful not to touch the tape when doing this 

as this could damage it.

If the meter was turned off, it now turns on.