Summary of Interactive 2000 PowerCharger

  • Page 1

    Powercharger dual and quad 2400 and 2700 series owner’s manual ®.

  • Page 2

    Table of contents introduction ............................................................................................. 1 standard features................................................................................. 1 expansion options .........................................................

  • Page 3

    1 introduction this anton/bauer interactive 2000 powercharger represents over 25 years of anton/bauer technology and experience in a totally new portable power system. The technology advancements of this new combination, charger/camera power supply, delivers the features and performance of several e...

  • Page 4

    2 expansion options the exclusive modular design of the new anton/bauer interactive 2000 powercharger provides ultimate flexibility for all video operations. Starting with any base model, a wide range of expansion modules and upgrades can be added: diagnostic/discharge functions, charge position exp...

  • Page 5

    3 safeguards power sources: this unit was designed to operate at mains voltages from 90 to 250 volts ac, 50-60 hz. Risk of electrical shock: refer servicing to qualified service personnel. To prevent fire or shock hazard, do not expose this unit to rain or moisture. Grounding/earthing important warn...

  • Page 6

    4 software revision, power rating, and model number can be obtained from the signature display. When the lcd shows the main display screen, press the test button on the front panel. Charging as with all anton/bauer chargers, charging with an interactive 2000 powercharger is fully automatic. Mount an...

  • Page 7

    5 three stage charging methodology in general, the powercharger will deliver a three stage charge routine to each battery. 1. Stage one will deliver a high rate charge matched to the capabilities of the battery (typically a one or two hour rate, depending on battery type and charger power module rat...

  • Page 8

    6 1 - - - - - - - 2 - - - - - - - note: anton/bauer strongly recommends that batteries are kept on the powercharger until ready for use. The lifesaver mode will keep them 100% charged and ready for use. Lcd indications each powercharger’s liquid crystal display (lcd) will display the status of each ...

  • Page 9

    7 led indications each charge position of a powercharger and powercharger charge module (xm models) has a pair of leds (one red, one green) which indicate the status of the battery attached to that position. The following table identifies all of the powercharger led indications and their meaning: le...

  • Page 10

    8 priority battery function a unique operating feature of all powerchargers allows the operator to select any battery on any charge position as a priority battery. While connecting a battery to any charge position, hold the display button until an audible indication sounds and the lcd indicates: the...

  • Page 11

    9 the standard test is adequate for virtually all conditions to verify the capacity of the battery before taking it into the field. The 24 hour test need only be performed on a battery, typically an older one (2 years or more), which may have exhibited questionable performance. Note: the ddm test mo...

  • Page 12

    10 when testing is completed, the lcd main display will indicate “test done”. To display or print test results: 1. Press the display button on the powercharger front panel to scroll to the primary position display for the battery tested. 2. Press the test button. The lcd will display the capacity of...

  • Page 13

    11 xm charge expansion module the “xm” charge expansion modules easily attach to any model powercharger via the 9- pin d-shell computer style connector marked “charge module accessory”. These economical modules automatically expand the powercharger’s charging capabilities with additional positions. ...

  • Page 14

    12 power loss memory mode the powercharger features a special power loss memory or “power down” mode. When mains power is interrupted while batteries are mounted, the powercharger will automatically indicate the charge status of all batteries until power is restored (up to 16 hours). When power is i...

  • Page 15

    13 warranty important: please mail warranty registration card within ten (10) days of purchase. We must have this card on file at our service department to establish this warranty. Proper registration will also enable us to provide update information on the interactive 2000 powercharger battery syst...

  • Page 16

    7595-0112 rev g the power behind the best cameras capturing the best images in the world. Sm the following are trademarks of anton/bauer, inc.: acs, adm, anton/bauer, anton/bauer logo and parallelogram design, aspekt, automatique, datatap, dionic, elipz, elightz, egripz, gold mount, hytron, impac, i...