Anton/Bauer Interactive 2000 PowerCharger Owner's Manual
Summary of Interactive 2000 PowerCharger
Page 1
™ nexus ™ phantom battery package owner’s manual.
Page 2
Table of contents important read and understand this manual before operation…………………………………………………1 introduction………………………………………………………...2 features……………………………………………………………....3 installation of nexus ™ phantom mount………………....4 attaching nexus np phantom mount…….………………...5 attaching nexus v-mount……………..………...
Page 3
Important read and understand this manual before operation the nexus phantom battery utilizing nickel cadmium battery chemistry delivers an uninterruptible power solution when used with the nexus series of batteries. The nexus series of batteries will only charge on one of the following chargers: • ...
Page 4
Introduction the aspekt nexus phantom battery system from anton/bauer is a component in the next generation of the popular np battery systems. The nexus battery, nexus phantom battery, nexus mounting system, and nexus charging systems have been designed to upgrade the np battery format into a batter...
Page 5
Features 1. Phantom mount status indicator – the phantom mount communicates with the attached nexus battery. The led indicates the status of the phantom battery. 2. Intelligent un-interruptible communication- the nexus phantom power system will provide seamless transitions from main power to back-up...
Page 6
Installation of nexus phantom housing the installation of te nexus phantom housing will vary dependent upon the type of nexus mount used. Identify if you are using nexus np or nexus v model. Identify the screws for your model. Only use the supplied screws. Tighten screws until you feel resistance – ...
Page 7
The phantom mount is attached between the camera and the nexus mount. Two separate types of screws are required for the np mount. These are provided with the nexus battery package. 1) attach the 2 pin wire connector from the phantom mount to the camera. 2) attatch nexus base mount to camera with 4 s...
Page 8
The phantom mount is attached between the nexus v-mount. The nexus v-mount is provided assembled from the factory. You must remove the screws in the nexus v-mount and re-assemble using the screws marked “v-mount version”. These are provided with the nexus phantom battery package. 1) remove the 6 scr...
Page 9
• do not attempt to charge this battery with any charger other than the nexus all chem chargers specified in this manual. •allow the battery to reach a steady green mode before using for the first time. Please read the individual charger owner’s manual to become acquainted with the many unique opera...
Page 10
Nominal charge times for nexus 50 charge level led indicators 100% steady green nexus 2, nexus 4 all chem chargers 25 minutes charge time can vary depending on age, condition and remaining capacity of each battery at the time it is placed on the charger. Phantom battery status indications • when the...
Page 11
Overcurrent indication • if the nexus battery is subjected to a load that exceeds specifications, the protection electronics will operate to protect the lithium ion cells. The phantom battery ups system will work in conjunction with the nexus battery to sense the overcurrent condition and automatica...
Page 12
Standard operation • the phantom mount communicates reserve battery backup status to the attached nexus battery. If the phantom is utilizing the reserve battery to power the camera and light, it will instruct the attached nexus battery to flash it’s number one orange led continuously. This gives the...
Page 13
Phantom battery oversurge protection guidelines • if a nexus battery is attached without first installing a phantom battery, camera power will be supplied by the attached nexus battery. Note-attaching a nexus battery without a phantom battery will disable the light output. This will prevent power su...
Page 14
Operating guidelines 1. Keep batteries cool or at room temperatures whenever possible. Sustained elevated temperatures contribute to the premature failure of batteries: a. Charging - charge batteries at room temperature. In warm climates keep chargers in air conditioned rooms for best performance. B...
Page 15
Service in the event a nexus phantom battery fails to deliver acceptable performance, it must be returned to the anton/bauer. No other facility is qualified and equipped to service the nexus batteries and calibrate the electronic components and sensors. Any attempt by the user or any other unauthori...
Page 16
Precautions 1. Do not expose this battery to high temperatures (above 50°c/120°f). This includes storage in direct sunlight , in cars in hot weather, or in close proximity to heating devices. This may cause electrolyte leakage, impaired performance and shortening of battery service life. 2. Redundan...
Page 17
Nexus phantom battery specifications output voltage 13.2 v nominal 12.0 ~ 16.5v operating capacity (cell capacity) 8 wh nominal (600 mah rated) recommended operation 15 - 40 watts 1 (maximum discharge rate) (54 watts) 2 weight .55lb .25kg size 1.25” x 3.0” x 4.5” 3.175cm x 7.62cm x 11.43cm charge te...
Page 18
Limited warranty this one (1) year limited warranty for the product specified in this document is given by anton/bauer, inc. (“anton/bauer”), 14 progress drive, shelton, connecticut 06484. If you have any questions regarding product applications, product specification, or to obtain warranty service ...
Page 19
Any other product or device. Misuse includes any use of the product in other than its intended application, including the use of this product with any charging device or accessory not manufactured by and/or specified by anton/bauer. This warranty does not cover, and anton/bauer assumes no responsibi...
Page 20
The following are trademarks of anton/bauer, inc.: acs, adm, anton/bauer, anton/bauer logo and parallelogram design, aspekt, automatique, compac, datalink, datatap, dionic, gold mount, hytron, impac, interactive, interactive 2000 logo, lifesaver, logic series, logic series logo, maxx man logo design...