B-AMP Bergantino Owner's Manual - page 17
16
Screen 5 – Profile USB Load
This menu allows you to load new profiles, via the B|AMP’s USB port, from a FAT32 formatted
thumb drive into one of the twelve dedicated Profile memory locations of the B
|
AMP. In this
menu, the B
|
AMP will read any file off the thumb drive with a .PRF extension. You will be able
to scan and select which speaker profile you would like to import from the thumb drive and
choose which dedicated profile memory location you would like to store it in for future recall.
You can also overwrite any currently saved profile with a new one. Once stored and power is
recycled, you will be able to load this new profile into the DSP’s profile filters from the Profile
Select menu above.
To load speaker Profiles:
• Insert thumb drive loaded with .prf files into B|AMP’S USB port
• Turn the Bass/Filters knob to select Profile on your USB thumb Drive
you want to store in memory
• Turn the Treble/Bright knob to select which memory location to store
the profile
• Press any knob to Store Profile.
The first screen below shows the software prompting the user to insert a USB thumb drive into
the B|AMP’s USB port in order to load a new speaker Profile (*.PRF file). The second screen
shows the CN212 profile being loaded into memory slot 3 of the B|AMP’s profile memory.
ð
Once loaded into one of the twelve B|AMP’s Profile memory slots, the new
speaker profile can be loaded into the B|AMP’s Profile EQ filters from the Profile
Select menu above.
ð
Important!
After loading Profiles and removing thumb drive from USB port,
you must recycle power.
Screen 6 – Line out Select
This menu allows you to select which signal is routed to the line out jack on the back of the
B|AMP. You have 2 choices, the preamp out signal (which is post Master volume), or tuner
out, which will allow you to hook up your own tuner to the Line out jack and receive an
unprocessed signal from the input stage of the B
|
AMP.