B-AMP Bergantino Owner's Manual - page 3
2
Important Safety Instructions
Read these instructions:
Please read all Safety and Operating instructions before connecting and operating this
product. This manual should be kept for future reference.
Verify AC Circuit Capacity Before Use:
Your new Bergantino B
|
AMP comes equipped with a UPS (Universal Power Supply) capable
of operating from 100 – 240VAC (~), 50/60Hz with no user adjustments or switching
necessary. The high power output of your amplifier may require heavy current draw under Full-
Load conditions. Connecting multiple amplifiers to the same circuit, or connecting the amplifier
to the same circuit used by other heavy power devices, such as high-wattage lights, may
cause circuit breakers to trip. It is always a good idea to avoid using any audio equipment on
the same AC circuit as equipment with motors, such as air conditioners or refrigerators. This
will lessen the possibility of power variation and electrical start-up noise affecting your sound.
Earth Grounding Connection:
To prevent electric shock, do not remove the grounding plug on the power cord, or use any
plug or extension cord that does not have a grounding plug provided. Make certain that the AC
outlet is properly grounded as well. Do not use an adapter plug with this product.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus:
To avoid safety hazards, use only the power cord supplied with your unit. We do not
recommend using an extension cord with this product. Damaged power cords should be
replaced immediately with cords meeting factory specifications. If a replacement cord is used,
make certain that it is of consistent quality and gauge as the original and is UL/IEC Certified.
When disconnecting the power cord from an AC outlet, always pull the plug, never pull the
cord. If you do not intend to use the amplifier for a considerable length of time, disconnectthe
plug from the AC outlet.
Do not use this apparatus near water:
Never expose the amplifier to rain, moisture, dripping or splashing water. Do not place objects
filled with liquids on or nearby the amplifier.
Do Not Open The Amplifier Enclosure:
There are no user-serviceable components inside this product. Opening the amplifier
enclosure may present a shock hazard, and modification to the product will void your warranty.
If liquid enters the unit, or any metal object such as a piece of wire accidentally falls inside the
enclosure, disconnect the unit from the AC power source immediately and consult an
authorized service station.
Unpacking:
The carton and packing materials used in shipping your new amplifier were specially designed
to cushion it from the shocks and vibration that occur during transport. We suggest that you
save the carton and packing materials for use in shipping, in the event you move, or the
amplifier needs repair.